Capacitance Converter

Converts farads, microfarads, and picofarads on this page.

Use this tool

Result

The result appears in this panel after you run the tool.

About this tool

The value is converted through a single base unit for that dimension. Labels name the system when US and UK differ.

Affine units share one base. Temperature-style offsets are not used in this set.

How to use it

  1. Open this page and provide the input it asks for.
  2. Set the options that are visible, then use Convert.
  3. Read the result in the panel. Copy it or download it when a file is offered. The input stays in this browser.

Limitations

Microfarads and picofarads under one farad

Six decades, then twelve

The farad row stores 1. A microfarad stores 1e-6, one millionth of a farad. A picofarad stores 1e-12, one millionth of a microfarad, because 1e-12 divided by 1e-6 is 1e-6, and the other way a single microfarad is 1000000 picofarads. Nanofarads are not a row. A marking of 100 nanofarads is 0.1 on the microfarad row, or 100000 on the picofarad row, after you do that placement yourself. The farad is the SI derived unit at the hub. The small rows are the decimal fractions written as powers of ten, not binary storage steps. Offsets are 0. Twice the capacitance is twice the number. The menu will not series-combine or parallel-combine parts. Parallel addition is still your sum.

A 100 microfarad bypass part

Type 100 as microfarads and ask for farads. The product is 100 times 1e-6, or 0.0001 farads. Ask for picofarads and you get 100000000 of them, since each microfarad is a million picofarads and the entry was 100. A 22 picofarad load toward farads is 22 times 1e-12. Toward microfarads it is 22 times 1e-6, or 0.000022, a figure easier to misread than the picofarad form. Keep the row that matches the silk screen. Electrolytic cans printed in microfarads and RF parts printed in picofarads are the two reasons both small rows exist. The farad row is there so the two can meet without a hand-counted string of zeros.

Farads are not ohms and not a time constant

Resistance has its own menu of ohms, kiloohms, and megaohms. Multiplying a resistance by a capacitance to get a time constant is not done here. Frequency is not consulted, so a capacitive reactance will not appear. Voltage rating, tolerance, and dielectric type are not factors. A 100 microfarad part rated at 16 volts converts the same way as one rated at 6 volts. The 1e-6 does not know the chemistry. A negative capacitance scales and is exotic or mistaken. The converter applies 1, 1e-6, or 1e-12 and stops.

Privacy

Your input is processed in your browser and is not uploaded to UtilChain. File names, text, and results are not sent to analytics.