Length Converter
Convert lengths through metres.
About this tool
The value is turned into metres and then into the unit you asked for. An inch is 0.0254 metres in that step.
The page does not convert areas or volumes. Those have their own tools.
How to use it
- Enter the length.
- Choose the unit you have and the unit you want.
- Convert. The intermediate unit is the metre.
Limitations
- The units are millimetres, centimetres, metres, kilometres, inches, feet, yards, and miles.
- The result is a decimal conversion, not a rounded construction measurement.
Inches and miles on the metre table
Shop drawings and road distances share one column
A machinist calling out millimetres and a highway sheet calling out miles are not running two formulas. Both readings are scaled onto the metre, whose row stores the multiplier 1. The millimetre row stores 0.001, the centimetre row stores 0.01, and the kilometre row stores 1000. The metre is an SI base unit, so those three steps are decimal moves around that base rather than a second origin. Customary lengths sit in the same column with the international figures already written down: an inch is 0.0254, a foot is 0.3048, a yard is 0.9144, and a mile is 1609.344. Nothing here squares a length, cubes it, or divides it by a time. Area, volume, and pace are other families even when the word metre appears in their names.
One inch, then the longer customary rows
Type 1 and choose inch toward metre. The product is 0.0254 metres. Divide by the centimetre multiplier 0.01 and the same stick reads 2.54 centimetres. Twelve inches reconstruct the foot row because 12 times 0.0254 equals 0.3048, the foot multiplier already stored, not a count the converter performs by itself. Three feet reconstruct the yard because 3 times 0.3048 equals 0.9144. A mile divided by that yard multiplier is 1760, and a mile divided by the foot multiplier is 5280, so the statute mile of 1609.344 metres lines up with those older counts. A kilometre, at 1000 metres, falls short of a mile by 609.344 metres. Fractional callouts such as three eighths of an inch have to be typed as decimals. The field multiplies the finite number it was given. It will not parse a slash as a fraction, and it will not snap the product to a construction tolerance.
What the metre column leaves alone
Zero stays zero: every length row has offset 0, so the map is a pure ratio. A minus sign is accepted and simply scales, even though a negative length is an odd thing to build. Survey feet that differed slightly from the international foot of 0.3048 metres are not a separate row, so a deed that still means the older survey foot will be wrong if you pick foot. Nautical miles are absent too. The mile row is only the 1609.344-metre statute mile. Chains, furlongs, and printer’s points are absent as well. If the quantity you hold is a square measure, leave this list. Multiplying two converted sides yourself is a different job from the area table, which already stores squared multipliers.
Privacy
Your input is processed in your browser and is not uploaded to UtilChain. File names, text, and results are not sent to analytics.

