Parallelogram Area

Enter base and height.

Use this tool

Result

The result appears in this panel after you run the tool.

About this tool

Area is base times height. Perimeter needs the other side length.

The height is perpendicular height, not the slanted side.

How to use it

  1. Open this page and provide the input it asks for.
  2. Set the options that are visible, then use Calculate area.
  3. Read the result in the panel. Copy it or download it when a file is offered. The input stays in this browser.

Limitations

Base times perpendicular height

What the two required boxes are

The first measure is the base. The second is the perpendicular height, the distance between the base and the opposite side, not the length of the slanted neighbor. Both must be greater than zero. The area is base times height. A rectangle is the special case in which the neighbor happens to stand upright, and the area formula does not change. An optional side box, when it holds a number greater than zero, adds a perimeter of 2 × (side + base). The side in that expression is the slanted neighbor, and the base is the first measure. If the side box is blank or not greater than zero, only the area is printed.

Base eight, height three

8 × 3 = 24, so the area line is 24. Type 5 in the side box and the perimeter becomes 2 × (5 + 8) = 26. Leave the side box empty and the 26 disappears while 24 stays. The diagram can mark that side when you provided it. It still treats the second required box as height.

A side shorter than the height still prints

Nothing checks that the slanted side is at least as long as the perpendicular height. A side of 1 with height 3 is impossible for a real parallelogram, yet a positive side still produces a perimeter line beside the area. That missing consistency check is the sharp edge. A zero or negative base or height is rejected and no perimeter is attempted. The page does not accept an included angle and then multiply by a sine. If you know two sides and the angle between them, find the perpendicular height first, then return.

Area from a sine, computed before you arrive

If the included angle is 30 degrees, the perpendicular height is the slanted side times one half, because sin 30° = 1/2. A base of 8 and a slanted side of 6 at 30 degrees imply a height of 3, and only then does this page’s product 8 × 3 = 24 apply. Typing 8 and 6 directly would report area 48 and, if you also put 6 in the side box, a perimeter of 2 × (6 + 8) = 28, describing a different height than the angle implied. The form cannot see the angle. Bring the perpendicular distance, not the neighbor’s length, in the height box.

Privacy

Your input is processed in your browser and is not uploaded to UtilChain. File names, text, and results are not sent to analytics.