Rhombus Area

Enter both diagonals.

Use this tool

Result

The result appears in this panel after you run the tool.

About this tool

Area is half the product of the diagonals. Perimeter uses the side if you enter it.

The diagonals are the full lengths, not half lengths.

How to use it

  1. Open this page and provide the input it asks for.
  2. Set the options that are visible, then use Calculate rhombus.
  3. Read the result in the panel. Copy it or download it when a file is offered. The input stays in this browser.

Limitations

Half the product of the full diagonals

Diagonals, not half-diagonals

The two required measures are the full diagonals, the corner-to-corner lengths, not the segments from the crossing to a corner. The area is their product divided by two. An optional side, when greater than zero, adds a perimeter of four times that side. The side is not derived from the diagonals. If you omit it, or it is not a positive number, the panel prints the area alone.

Diagonals six and eight

(6 × 8) / 2 = 24. That is the area line. For a rhombus those diagonals meet at right angles and bisect each other, so each right triangle inside has legs 3 and 4 and a hypotenuse of 5. If you type 5 as the side, the perimeter line is 20, which agrees with that triangle. The page did not compute the 5. You supplied it, and 4 × 5 was attached because the side was positive.

A contradictory side is still accepted

Type the same diagonals and a side of 9. The area remains 24 and the perimeter becomes 36, even though no rhombus has diagonals 6 and 8 and side 9. The form never compares the side with √((d1/2)² + (d2/2)²). Zero or negative diagonals are rejected. Half-diagonals typed by mistake cut the area by four, because each diagonal is halved and the product of two halves is a quarter. The kite page uses the same area product and then refuses to print a perimeter at all. Here the perimeter exists only as four times a side you chose to type.

Recovering the side when you want consistency

Half of 6 is 3 and half of 8 is 4. Those legs and the side form a right triangle, so the matching side is 5 and the matching perimeter is 20. If you do not want to type a side, stop at the area 24. If you do type one, compare it with that hypotenuse before you publish the perimeter. The area line will not change to punish a bad side. Diagonals of equal length make a square only when they are perpendicular bisectors of each other, which a rhombus already assumes. Equal diagonals of 10 and 10 give area 50. The matching side is 5√2, and a typed side of 7 would again print a perimeter the diagonals do not support.

Privacy

Your input is processed in your browser and is not uploaded to UtilChain. File names, text, and results are not sent to analytics.