Voltage Converter

Converts volts, millivolts, and kilovolts on this page.

Use this tool

Result

The result appears in this panel after you run the tool.

About this tool

The value is converted through a single base unit for that dimension. Labels name the system when US and UK differ.

Affine units share one base. Temperature-style offsets are not used in this set.

How to use it

  1. Open this page and provide the input it asks for.
  2. Set the options that are visible, then use Convert.
  3. Read the result in the panel. Copy it or download it when a file is offered. The input stays in this browser.

Limitations

Millivolts and kilovolts around a single volt

A bench rail with three labels

The volt row stores 1. A millivolt stores 0.001. A kilovolt stores 1000. The kilovolt is a decimal prefix, a power of ten on the volt, and the millivolt is the matching small step. No other prefix is present. Microvolts, nanovolts, and megavolts are not rows, so a microvolt reading has to be typed as a thousandth of a millivolt, that is 0.001 on the millivolt row, if you want the table to see it. Offsets are 0. Electrical potential here is a ratio. Doubling the potential difference doubles the converted figure. An affine shift, the kind a Fahrenheit mark needs because its offset is -32, never runs on these three rows.

A 3.3 volt rail and a 10 kilovolt stack

Enter 3.3 as volts and ask for millivolts. Divide 3.3 by 0.001 and the rail is 3300 millivolts. Enter 1 as millivolts toward volts and the product is 0.001. A sensor output of 250 millivolts is 0.25 volts. Enter 10 as kilovolts toward volts and you get 10000 volts, the entry times the kilovolt factor of 1000. A line that says 0.4 kilovolts is 400 volts. People sometimes write mV and mean megavolts in a hurried note. This menu’s millivolt is the 0.001 row, and there is no megavolt to confuse it with. When the note truly means a thousand volts, choose the kilovolt row, the one whose factor is 1000.

Potential is not power and not a battery capacity

Watts live on the power list, with horsepower at 745.6998715822702 watts. Multiplying this voltage by a current to estimate power is a step the voltage rows will not take. Milliampere-hours are charge, and the charge list treats each of them as 3.6 coulombs. A cell labelled 3.7 volts is a voltage only. Its capacity in milliampere-hours does not enter this conversion. RMS versus peak is a waveform question. The factors do not multiply or divide by the square root of two. A negative voltage scales and usually encodes polarity. The page stores no ground reference of its own.

Privacy

Your input is processed in your browser and is not uploaded to UtilChain. File names, text, and results are not sent to analytics.