Trapezoid Area

Calculate the area of a trapezoid from the two parallel sides and the height.

Use this tool

Result

The result appears in this panel after you run the tool.

About this tool

The area averages the two bases and multiplies by the height. A side or height that is zero or negative is rejected.

The diagram sketches those three lengths. It does not solve for a missing side.

How to use it

  1. Enter the two parallel sides and the height.
  2. Calculate. The diagram uses those lengths.
  3. A non-positive side or height is rejected.

Limitations

Average of the bases, times the height

The three lengths that define the area

a and b are the two parallel bases. The height is the perpendicular distance between them. All three must be greater than zero. The area is ((a + b) / 2) × height, the average of the bases times that separation. The panel always prints the area. Two optional leg fields, when both are finite and greater than zero, add a perimeter line equal to a + b + leg + leg. If either leg is missing, zero, or not a positive finite number, the perimeter line is omitted and the area still stands.

Bases six and ten, height four

The average of 6 and 10 is 8. Times height 4, the area is 32. Legs of 5 and 5, if you also type them, add a perimeter of 6 + 10 + 5 + 5 = 26. Clear the legs and the 32 remains alone. The diagram sketches the two bases and the height. It does not solve for a leg you left blank.

Legs that cannot physically reach

The area path never inspects the legs. You can type legs that are too short to span the difference between the bases, and, once both are positive numbers, the perimeter line still appears. That is a gap in the check, not a geometric construction. A base of zero or a height of zero is rejected before any perimeter is considered. The formula assumes the height meets the bases at right angles. Feeding a slanted side into the height box inflates or shrinks the area with no second warning. This page does not treat a triangle as a trapezoid with a zero base, because a non-positive base is rejected rather than passed into the average.

Which length is the height

The height is the perpendicular gap, even when the picture leans. A non-parallel side is a leg, and it belongs in a leg box only if you want the optional perimeter. Putting a leg into the height box changes the area. With bases 6 and 10, a true height of 4 yields 32. A leg of 5 typed into the height box instead yields ((6 + 10) / 2) × 5 = 40, which is a different quadrilateral measurement and still a successful run. Read the three required labels before you treat 40 as the area of the trapezoid you measured.

Privacy

Your input is processed in your browser and is not uploaded to UtilChain. File names, text, and results are not sent to analytics.